hab da jetzt was gefunden:
http://forum.xda-developers.com/showthread.php?t=336234nur verstehe ich kein wort, hat jemand eine unkomplizierte deutsche anleitung !!
SCLPF 1-62
**********
Thankyou for your interest in my HTC Cube Clone. I would please ask that for anyone who uses my software and enjoys it please make a small....or big donation
I will continue developing this in the future based on you YOUR support, thankyou for those who have already supported this project as it was a huge inspiration to get it this far, so again I thankyou!
***********************************************************************************************************************************************
*PLEASE BE AWARE, I DO NOT TAKE ANY RESPONSIBILITY FOR ANY MISADVENTURES YOU ENCOUNTER WITH MY SOFTWARE ON YOUR WINDOWS MOBILE DEVICE. *
*I ALSO DO NOT TAKE RESPONSIBILITY FOR ANY LOSS OF DATA OR PHYSICAL DAMAGE OR PERSONAL INJURY WHATSOEVER TO YOU OR YOUR WINDOWS MOBILE DEVICE.*
***********************************************************************************************************************************************
Okay please read below for instructions on installing my software on your phone.
==============================================================================================================
|WARNING : I WILL NOT BE ABLE TO ASSIST YOU IF YOU DON'T REMOVE PREVIOUS VERSIONS OF MY CUBE FROM YOUR PHONE.|
|WARNING : I WILL NOT BE ABLE TO ASSIST YOU IF YOU DON'T READ THE INSTRUCTIONS IN ORDER AND FOLLOW THEM. |
==============================================================================================================
INSTRUCTIONS
************
Step 1. Download SCLPF 1-62
Step 2. Install Adobe Flash Lite 2.1 IF your device doesn't have it installed already.echt
Step 3. Instal efrosts FTouchFlo version 1.4.1. I don't take responsibility in the configuration of FTouchFlo.
Please request assistance from efrosts thread. Also if you enjoy his software please dontate to him as
he is working on a great new Touch program.
Step 4. Copy the file "SCLPF_1-62_setup.cab" to your device.
Step 5. Copy the "SCLPF Links" folder from your computer to your Windows Device here : "/Windows/Start Menu/Programs/SCLPF Links"
*PLEASE NOTE : YOU WILL NEED TO EDIT THE PATH FOR ADOBE FLASHLITE IN THAT FILE AS YOUR LOCATION OF FLASH LITE MAY BE DIFFERENT ON YOUR DEVICE!!!!*
*If this is you please edit this file : /FTouchFlo/FTouchFloConfig.txt
Step 6. Click "Start->Programs->FToucFlo". This starts FTouchFlo.
Step 7. Run the file you just copied "SCLPF_1-62_setup.cab". This installs the remaining cube files in the appropriate locations.
Step 8. You must now configure your cube for it to function. Click "Start -> Programs -> SCLPF -> Cube Settings"
Step 9. There are 4 faces of the cube to configure. Tap on an icon from the main screen and it will allow you to change the program it launches.
Step 10. When you have configured all faces buttons you can either test out your cube OR add text to the icons :
a. To change icon text you must click "Menu->Icons And Text" and then tap the icon you wish to change.
b. On this screen you can now either select the text color, type the text or tap the icon to select another icon.
c. When done click save to save your changes.
Step 11. Quit "SCLPF-Config App" and it will open up the Applications page of the cube.
(If you do not see this then you have copied the SCLPF directory in the wrong location please re-read step 3 again)
Step 12. Provided your FTouchFlo has been configured with the proper Adobe path you should now be able to slide your finger
from the bottom to the top of the screen. The cube will open and you can rotate it by sliding your finger
from the middle left of the screen to the middle right of the screen and vice versa. If you wish to close the cube you can slide
from top of the screen to the bottom of the screen.
Step 13. Double check each guesture in FTouchFlo is configured to start any of the four Flash startup files listed below :
-StartApps.swf
-StartMain.swf
-StartMusic.swf
-StartContacts.swf
Step 14. Finished!!!! That's it. Your cube is now configured and ready to play with. Please don't forget to donate if you haven't already!!!
HOW TO ADD MORE PROGRAMS TO THE SCLPF-CONFIG APP LIST
*****************************************************
Step 1. Open File Explorer and navigate to the location of your program.
Step 2. Hold your stylus on the program.
Step 3. Wait until a context menu appears and select "Copy".
Step 4. Now navigate to "/Windows/Start Menu/Programs/"
Step 5. Click "Menu->Edit->Paste as Shortcut".
Step 6. Your file is now listed in "/Windows/Start Menu/Programs/"
you may rename the file to something different if you wish.
Step 7. DONE!!! Your program will now be listed in my SCLPF-Config App for you to choose.
Regards,
Slither2006.
